Manual hose reel type STKi2W (with angled gear)

Manual hose reel type STKi2W (with angled swivel) - picture STKi2W 20/19 Description:
The angled gear is the special element of the hose reel STKi2W. Its construction and technology corresponds to tested type STKi2.

A removeable manual crank handle, front operated, allows the operation in tight spaces. The transmission ratio 2:1 faciliates rewinding heavy hoses.

postbulletsStainless steel AISI 304 (application in wet areas)

Reel bearing and brake:
Maintenance free, chemical resistant plastic slide bearings, resistant to wet conditions and dirt. A mechanical brake integrated in the bearing permits a variable drum braking.

Crank handle:
A removeable manual crank handle (front operated) with a rotary polyamide roll is used to rewind the hose.

Angled swivel:
The standard angled swivels are provided with stainless steel axles. Depending on the nominal width, the housing consists of ebonite hard anodized aluminium die casting alloys or chemical nickel plated brass. All types can be supplied in stainless steel AISI 304 and 316 upon request.

Pipe bend:
A connecting pipe that is welded with the axle guarantees an easy hose mounting, without bending the hose extremely.

Mounting possibilities:
The base can be mounted in two positions without brackets. We do not recommend wall swivel brackets because the reel could deflect while rewinding the hose.

Application areas:
Water, water with chemical cleaning supplies, air, oil and grease. The maximum permitted operating temperature is regularly 100°C. If required, the hose reels can be modified to a temperature of 180°C for an extra charge.

Angled swivel WDTH12/Al
Swivel WDTH12/Al
Brake block to stop the hose reel
Brake handle
Crank handle with free turning polyamide grip
Front operated crank