Description:
This very reliable maintenance-free stainless steel construction designed for high durability. Suitable for solo- and tandem use. This type allows single as well as the mounting of two ceiling gyroscopes parallel. The gyroscope rotates up to 360°.
Pipe:
Torsion resistant and reliable pipe made from stainless steel. The high pressure hose inside the pipe is well protected. The bend protection at the pipe outlet prevents hose damages. The elasticity of the resistant hose avoids frost damages. The boom can be tilted up to 10° and allows the tandem use. The minimum distance between two ceiling booms must be 850mm.
Bearings:
Reliable plain bearing, greased and encapsulated for high durability will guarantee a smooth gliding.
Angled Swivel:
The standard angled swivel WDTH10/Al is provided with stainless steel axles. The housing consists of ebonite hard anodized aluminium die casting alloys.
Application areas:
Car wash, service stations, garages and factories.
Scope of delivery:
The gyropscope is entirely pre-assembled: The equipment contains a connecting hose between the angled swivel and the outlet. A set of screws and dowels for the mounting onto the wall are included in the delivery. The working hose (outlet to pistol) and feeding hose (water connection to console) is not included but available on request.
Variations:
| Type | KRRoU/145 |
KRRoU/150 | KRRoU/155 | KRRoU/165 |
| Item number: | V10730013 |
V10730013-1 | V10730013-2 | V10730013-3 |
| Boom length: | 1450mm |
1500mm | 1550mm | 1650mm |
| Weight: | 9,8kg | 10,0kg |
10,2kg |
10,5kg |
| Dimensions: |
see downloads on the left | |||
Additional variations:
| Type | KRRoU/175 |
KRRoU/200 | KRRoU/250 | KRRoU/300 |
| Item number: | V10730013-4 |
V10730013-5 | V10730013-6 | V10730013-7 |
| Boom length: | 1750mm |
2000mm | 2500mm | 3000mm |
| Weight: | 10,8kg | 11,4kg |
12,7kg |
14,0kg |
| Dimensions: |
see downloads on the left | |||
Technical data:
| All types | ||||
| Working hose: | mounting height | |||
| Feeding hose: |
distance to wall | |||
| Nominal width: |
10mm (3/8") | |||
| Inlet (console): |
3/8" outer thread |
|||
| Outlet (hose fitting): |
3/8" outer thread |
|||
| Temperature: |
1-100°C (at extra charge up to 180°C) |
|||
| Operating pressure: |
max. 300bar (at extra charge up to 400bar) |
|||
| Tensile load: |
150N / 15kg |
|||
| Suitable substances: |
water /cleaning substances / air / oil / greases / etc. | |||
| Angled swivel: | WDTH10/Aluminium (B10700035) |
|||
 10° tilt possible |
 Swivel WDTH10/AL |
 Bend protection |
